Anritsu MT8212E - Page 425

Spectrum Analyzer Verification 2-2 Frequency Accuracy Verification
MT8212E and MT8213E MM PN: 10580-00255 Rev. J 2-3
21. Press the Marker main menu, then the More submenu key, set Counter Marker to On, press the Back
submenu key, and then press the Peak Search submenu key.
22. Verify that the marker frequency is 3.9GHz±5.85kHz (±1.5ppm) and
then 5.9GHz±8.85kHz(±1.5ppm) for the MT8213E only, and record in Table A-1.
Note
If the instrument fails the Section 2-2 “Frequency Accuracy Verification” test, then contact your local
Anritsu Service Center (http://www.anritsu.com/Contact.asp).