Anser A1 - Assign Print Message

ANSER CODING INC. 8 A1 User Interface
1.2.2.1 Assign Print Message
Create Message
STEP 1: Press Create Message and set message property. Press OK and enter Message Editor.
Figure 1-8. Initial Setup – Create Message (1)
STEP 2: In Message Editor, hit Add Object “ ” to insert desired objects. Please refer to Section 1.4.1 for detailed
operations.
Figure 1-9. Initial Setup – Create Message (2)
Use “Add Objects”
to start editing.
Press to set
message
property.