ANSER CODING INC. 82 A1 Operation
Table 3-3. I/O Edit – Event List Definition
Event Definition
Print Job - Print Stop: To monitor if printing has stopped. E.g., pressing Stop button.
- Print Start: To monitor if printing started. E.g., pressing Start button.
Input A1 M8 8-pin port, pin #8 (DIN). Please refer to A1 Technical Specifications V0.1.
- Input High: To monitor if input signal is high level.
- Input Low: To monitor if input signal is low level.
- Input Falling: To monitor input signal transition from high to low.
- Input Rising: To monitor input signal transition from low to high.
- Sensor1-Released: To monitor if printhead-1 photocell is released.
- Sensor1-Triggered: To monitor if printhead-1 photocell is blocked.
- Sensor1-Triggering: To monitor if printhead-1 photocell is blocking.
- Sensor1-Releasing: To monitor if printhead-1 photocell is releasing.
- Sensor2-Released: To monitor if printhead-2 photocell is released.
- Sensor2-Triggered: To monitor if printhead-2 photocell is blocked.
- Sensor2-Triggering: To monitor if printhead-2 photocell is blocking.
- Sensor2-Releasing: To monitor if printhead-2 photocell is releasing.
Alarm Low Ink: Monitor if a cartridge has reached low ink level.
Warning - Wi-Fi Disconnected: To monitor if Wi-Fi connection is lost.
- USB Disconnected: To monitor if USB is unplugged.
- LAN Disconnected: To monitor if LAN cable is unplugged.
- Ink Cartridge Error: To monitor if a cartridge is in one of the following status –
Disc chip errors.
Gate not closed.
No cartridge inserted.
Wipe alert.
- No Ink: To monitor if a cartridge is empty.
- Ink Ready: To monitor if a cartridge ink volume is normal and ready to print.
Buffer - Empty Buffer: To monitor if the external buffer is empty.
- Buffering: To monitor if the external buffer has data.
- Full Buffer: To monitor if the external buffer is full.
Print Status - Print Complete: To monitor if print job completes.
- Print Printing: To monitor if the printer is in printing status.
To Next Page
Loading...
