ANSER CODING INC. 69 A1 Printing Setup
2.4.1 General
- Station Delay:
Both station delay can be adjusted simultaneously.
The delay is applied in the next print.
- Print Direction: Set print direction in the print station. Setting is applied after two prints.
2.4.2 Counter
All the options found in this tab are applied after two prints.
- Message Counter: Reset to zero information display count and total count parameters.
- Object Counter: Reset to zero in the start value for the counter objects within a message.
2.4.3 Variable Input
Update one or multiple variable objects contained within the printing message. It is used when users are only allowed
to change parts of a message. Use together with changing the access level to achieve this purpose.
2.4.4 Database
After an excel file (.csv) is imported, select the row from which to start printing. This setting will be applied after two
prints.
2.4.5 Repeat Print
Repeat print settings are applicable for applications where it is required to print the same content repeatedly a finite
number of times or to continue printing while encoder motion is detected.
Figure 2-10. The Repeat Print Settings Page
To Next Page
Loading...
