ANSER CODING INC. 54 A1 User Interface
Table 1-11. A1 System Settings Description
Option Description
System Language and
Keyboard Layout
It allows users to change system language and add multiple languages to the
keyboard.
Screen Settings It allows users to configure the following items:
Display Test: Perform a test on the LCD panel.
Brightness: Adjust the brightness of the screen.
Auto-Lock: Log users out of the system. Note: A password is required to log in again.
Screen Saver: It blanks the screen when the printer has been idle for a specified
time.
Screen Flip: It allows users to rotate the screen 180 degrees when the printer is
installed up-side-down.
Touchscreen Sensitivity: Turn it down to prevent any accidental touch in dusty
environment.
System System Time: It allows to set the system time.
System Unit: It allows to set the measurement unit.
Status Refresh The time interval to update the information displayed on the homepage.
Message Display Effect Off: Message preview is displayed according to settings such as print upside down.
On: Message preview is not affected by print upside down setting.
Protocol Modbus Printer ID: Assign an ID number to identify the printer when using the
protocol.
Protocol Version: Select a protocol version to communicate with the printer.
To Next Page
Loading...
