Anser A1 - Getting to Know the Device Configuration Page; Production Line & Print Station Page

ANSER CODING INC. 40 A1 User Interface
1.5 Getting to Know the Device Configuration Page
The device configuration menu is where users find settings related to the production line, print station, printheads, and
external devices. If initially no setup has been done, users can access this page to set up the printer. Additionally, settings
for serial communication capable devices can be found on the External Devices page.
1.5.1 Production Line & Print Station Page
It displays an overview of the production line and allows users to create, edit, and remove production lines and print
stations. One production line setup can support one print station in single mode or stitch mode. Same printhead can
exist within multiple production lines setup, but two production lines can’t use the same printhead simultaneously.
In homepage, press Production Line “
” or Menu “ ” to go to Production Line page.
Figure 1-44. Production Line & Print Station Page
The Production Line & Print Station page allow users to perform the following:
• Create a production line.
• Access production line settings.
• Delete or duplicate a production line.
• Import or export production line.
Edit selected
production line.
Copy selected
production line.