Applent Instruments AT2818 - Page 90

90
AT2818/2816A/2816B/2817A/2817/810A User's Guide
C
0.0001pF ～ 9999.9mF
R、X、Z 0.0001Ω ～ 99.999M
B、G 0.01nS ～ 999.99S
D
0.0001 ～ 9.9999
Q
0.0001 ～ 99999
θd -179.99°～179.99°
θr -3.1416 ～ 3.1416
%
-99.999% ～ 999.99%
 AT810AMeasurementRange 
Parameter Measurement Range
L
0.001nH ～ 9999.99H
C
0.001pF ～ 9999.99mF
R、X、Z 0.00001Ω ～ 99.9999M
B、G 0.01nS ～ 999.999S
D
0.00001 ～ 9.99999
Q
0.00001 ～ 99999.9
θd -179.999°～179.999°
θr -3.14159 ～ 3.14159
%
-999.999% ～ 999.999%
Measurement Speed: 30 times/s, 10 times/s, 6 times/s, 3times/s
Output impedance: 30, 50 and 100,
Ranging: Auto, Hold and Nominal range. Total 9 Ranges.
Equivalent Circuit: Serial and Parallel
Correction Function: OPEN/SHORT/LOAD
Files: built-in 10 files
Beep Feature: OFF/GD/NG and HIGH/LOW tone.
Trigger Mode: Internal, Manual, External and Bus Trigger.
Built-in Interface: Handler interface and RS232 interface.