Atlas Copco STwrench User Manual

System Overview STwrench User Guide
34 (326) 9836 4134 01 Edition 2.9
a limited number of wrench settings/customizations.
NOTE: When the STwrench is used only with Torque
Supervisor, ToolsTalk BLM is optional. However,
without the software, there is no access to the
STwrench settings and TAG writer function.
The following optional modules can be installed in the STwrench controller:
QAT barcode reader module
Module for scanning barcode labels on assembly components for easy
traceability.
QAT IRC-W dual band radio module
Radio module for interfacing the STwrench with ToolsNet, Power
Focus, QATnode, API.
NOTE: The new module, marked QAT IRC-W Dual Band,
supports dual band 2.4 GHz and 5 GHz.
This manual refers to the firmware version of the radio module
2.14 or later.
The old module, marked QAT IRC-W, supports only the 2.5
GHz band.
QAT IRC-B radio module
Radio module for interfacing the STwrench with Power Focus.
QAT IRC-Z radio module
Radio module for interfacing the STwrench with Power Focus.

Atlas Copco STwrench Specifications

General

Brand	Atlas Copco
Model	STwrench
Category	Tools
Language	English