STwrench User Guide System overview
9836 4134 01 Edition 2.9 35 (326)
The following accessories are also available:
STwrench Cable Box
Kit for interfacing the STwrench with Power Focus via a cable.
The Tensor SL Cable (available in 4 different lengths: 3m, 5m, 10m or
15m) must be purchased separately.
QATnode P
QATnode for printing the tightening results on a STAR printer.
QATnode I/O
QATnode with I/O module, for operating the STwrench from a remote
device (for example, a PLC)
It allows the tightening results to be printed on a STAR printer.
QATnode T
QATnode with ToolsNet connection.
It also offers the I/O module and printing function on a STAR printer,
provided by the QATnode I/O.
Battery short HD
This shorter battery can substitute the standard battery. Its capacity and
operating time is half the standard STwrench battery.
To Next Page
Loading...
