AudioCodes 400HD Series - Using the Configuration File; EAP MD5 Mode

400HD IP Phones Series - Teams Compatible
Administrator's Manual 104 Document #: LTRT-09960
3.5.6 Using the Configuration File
This section shows how to configure 802.1X using the Configuration File.
3.5.6.1 EAP MD5 Mode
This section shows how to configure 802.1X settings for EAP MD5.
 To configure EAP MD5:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameters using the table below as reference.
Table 3-47: EAP MD5 Parameters
Parameter Description
network/lan/_802_1x/eap_type Sets 802.1X Extensible Authentication Protocol mode
[Disable] = Disables the use of 802.1X
[EAP_MD5]=Authentication is implemented by user
name and password (Password is optional).
network/lan/_802_1x/md5_identity User ID for MD5 mode.
network/lan/_802_1x/md5_password Password for MD5 mode (leave blank if no password).