AudioCodes 400HD Series - F Switching Devices from Teams Compatible to Teams Native Mode; Prerequisites; Upload Software Files to the Device Manager; Enable MD5 File Uploading to the Device Manager

Administrator's Manual F. Switching Devices from Teams Compatible to Teams Native Mode
Version 3.4.4 223 400HD IP Phones Series - Teams Compatible
F Switching Devices from Teams
Compatible to Teams Native Mode
This appendix shows how to configure a provisioning template and upload software files on
the AudioCodes Device Manager or OVOC to switch devices from Teams Compatible to
Teams Native mode.
F.1 Prerequisites
 Device Manager or OVOC installed on the management server
 Teams Compatible firmware file: UCC450HD_3.4.5.2.img or later
 Teams Native firmware file: C450HD_TEAMS_1.8.288.android_images.zip or later
 Teams native .md5 file: C450HD_TEAMS_1.8.288.android_images.zip.md5
F.2 Upload Software Files to the Device Manager
F.2.1 Enable MD5 File Uploading to the Device Manager
1. In the Device Manager, go to Setup > System Settings.
2. In the System Settings page, go to Upload File Extensions.
3. Add .md5 to the ‘Accept Extensions’ field and click Save.
F.2.2 Upload Teams Compatible Firmware File
1. Upload the file UCC450HD_3.4.5.2.img to the Device Manager.
2. Go to Setup > Devices Configuration > Firmware Files.
3. Click Add new device firmware
4. Enter Name, Description, Version (without suffix .img) and Tenant.
5. Click Continue & Upload.