AudioCodes 400HD Series - Enabling SSH Access

Administrator's Manual 5. Maintenance
Version 3.4.4 179 400HD IP Phones Series - Teams Compatible
 To configure Telnet:
1. Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table as reference.
Table 5-4: Telnet Parameters
Parameter Description
Note: To add a value to these parameters, enter management/ followed by the parameter name,
equal sign and then the value (e.g.
management/telnet/enabled
=0).
management/telnet/enabled Enables telnet access to the phone.
 [0] Disable (default)
 [1] Enable
The user name and password for telnet access are according to
the parameters: system/user_name and system/password.
5.4.2 Enabling SSH Access
Secure Shell (SSH) protocol can be configured for secure remote login to the 450HD,
C450HD and 445HD phones and the HRS. Network administrators can use configuration file
parameter ‘management/ssh/enabled’ to enable the feature (by default, it is set to 0, i.e.,
disabled).