AudioCodes 400HD Series - Installing the Btoe PC Application

400HD IP Phones Series - Teams Compatible
Administrator's Manual 136 Document #: LTRT-09960
4.12.2 Installing the BToE PC Application
This section shows how to install AudioCodes' BToE PC/laptop application.
 To install the BToE PC/laptop application:
1. After obtaining the installation file whose name will be either AudioCodes BToE.exe or
AudioCodes BToE.msi, save it to your PC and then double-click it.
Note:
• If you install with the exe, then when upgrading you must use the exe. You cannot
upgrade with the msi if you first installed with the exe, and vice versa.
• See Section 4.12.3 for information on how to distribute the BToE PC application msi
package.
• Some PCs require the installation of .Net 4.0 prior to the installation of the BToE
PC/laptop application. If you use the installation file AudioCodes BToE.exe, the
Installation Wizard will detect that .Net 4.0 is missing and will prompt you to install it:
When installing the BToE PC/laptop application using the installation file AudioCodes
BToE.msi, you won’t be prompted to install .Net 4.0 and the network administrator
should make the necessary preparations prior to installation of the BToE PC application.
The Prepare to Install screen opens showing preparation progress until the Welcome to the
InstallShield Wizard screen opens as shown in Figure 4-7.