AudioCodes 400HD Series - Configuring HTTPS; Supported Encryption Ciphers and TLS Version

400HD IP Phones Series - Teams Compatible
Administrator's Manual 106 Document #: LTRT-09960
3.5.7 Configuring HTTPS
This section shows how to configure the connection between AudioCodes’ Device Manager
and the phone using HTTPS, to secure communications.
 To configure HTTPS:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 3-49: HTTPS Parameter
Parameter Description
security/web/https_only Enables the HTTPS protocol.
 [0] Disable (default)

[1]
Enable
3.5.8 Supported Encryption Ciphers and TLS Version
Note: The 400HD Series of IP Phones is aligned with TLS version 1.2.