AudioCodes 400HD Series - Deactivating DSP Recording; SSH Access to Phone

Administrator's Manual 3. Manual Configuration of a Single IP Phone
Version 3.4.4 121 400HD IP Phones Series - Teams Compatible
3.6.6 Configuring T9
When searching for a contact in the Corporate Directory, users can press dial pad keys to
input letters. Only a single press on any key, regardless of the letter's position on the key, is
necessary
See the phone's User's Manual for more information.
 To configure T9:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 3-57: T9 Parameter
Parameter Name Description
lync/contact_search_t9_enabled
Enables or disable T9 mode. Default=Enable.
3.6.7 Configuring the Caller Name to be Displayed
Network administrators can configure the caller’s name to be displayed from the incoming
SIP message’s “From” header or from information in the Active Directory (default).
 To configure the feature:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 3-58: Caller Name to be Displayed
Parameter Name Description
lync/contact_name_priority
 CONTACT_SEARCH (Default) = phone
displays the caller name from the Active
Directory’s information
 CALL_DESCRIPTION = phone displays
caller name from the incoming SIP
message’s “From” header