AudioCodes 400HD Series - Connecting the Skype for Business Client with the IP Phone; Figure 4-29: Sign-In Request Prompt

400HD IP Phones Series - Teams Compatible
Administrator's Manual 152 Document #: LTRT-09960
4.12.9 Connecting the Skype for Business Client with the IP Phone
This section shows how to connect the Microsoft Skype for Business client with the IP phone
using the Skype for Business login screen.
 To connect the two:
 Enter your credentials in the Sign-in request prompt, and click OK.
Figure 4-29: Sign-in Request Prompt
Note:
• Signing in via the Skype for Business client is flexible with respect to user name
format: It can be entered in NetBIOS format (domain\user, for example,
companyname\johnb) as well as User Principal Name (UPN) format
(user@domain, for example, johnb@companyname.com).
√ BToE version 2.1.8 must be installed.
√ The configuration file parameter ‘lync/BToE/use_UPN_str’ must be
configured to 1 (Default: 0).
• Primary Device cannot be changed in the Skype for Business PC client during a
call. When the phone is in idle mode (not in a call), the PC application must be
disconnected in order to change Primary Device.