AudioCodes 400HD Series - Configuring Programmable Softkeys for a Customized UI Experience

400HD IP Phones Series - Teams Compatible
Administrator's Manual 56 Document #: LTRT-09960
3.3.3 Configuring Programmable Softkeys for a Customized UI
Experience
Users can configure Programmable Softkeys for New Call state, Ongoing call state and
Idle screen state as part of the phone’s capability of allowing a customized user interface
experience.
 Configurable idle screen
Administrators can customize the home screen in line with the preferences /
requirements of enterprise management and / or the employees. A typical use for this
feature can be the option to disable the Meet Now softkey and replace it with another
softkey such as the Received Calls softkey or the Calendar softkey.
 Configurable ongoing call screen.
Administrators can customize the ongoing call screen (shown in the figure below)
in line with the preferences / requirements of enterprise management and / or the
employees.
For example, the BXfer softkey in the ongoing call screen shown in the preceding
figure can be replaced with the New Call softkey shown in the figure below on the
phones of enterprise users who infrequently transfer calls.
 Configurable initiate call screen
Administrators can customize the initiate call screen (shown in the figure below)
in line with the preferences / requirements of enterprise management and / or the
employees.
For example, the URL dialing softkey in the initiate call screen shown in the
preceding figure can be replaced with the Contacts softkey shown in the figure
below.