Administrator's Manual 2. Automatic Mass Provisioning of IP Phones using DHCP
Version 3.4.4 29 400HD IP Phones Series - Teams Compatible
Figure 2-15: Configure Options 2
14. In the Server Options page (or Scope Options page) that opens, select the Advanced
tab, ensure that DHCP Standard Options remains selected, and select the phone
model for the first User Class to be defined. Scroll through the Available Options (all
are cleared) and select only 160 AudioCodes 160 Option.
The figure below shows the Server Options page. The Scope Options page is identical.
Note that the String value you defined for Scope Option 160 is automatically populated,
so it's unnecessary to change it. Note also that if additional DHCP Options are required
(such as DNS or time server) that are different from the Servers Options for the rest of
the Scopes on the server, they can also be selected, but this is typically not needed.
Figure 2-16: Server Options
15. Add each phone’s User Class.
You have successfully created separate Scope Options that will only allow AudioCodes
phones to connect to the Device Manager when they boot up and will not allow other
vendor phones from receiving Device Manager server as their configuration server.
To Next Page
Loading...
