AudioCodes 400HD Series - Performing Teams Call Operations; Making Calls and Redialing

400HD IP Phones Series - Teams Compatible
Administrator's Manual 70 Document #: LTRT-09960
3.4.5.3 Configuring Pause Dialing for a Speed Dial to an Ext. behind an IVR
Pause dialing can be configured for a Speed Dial to create a time break, typically requried
for a Speed Dial which dials a destination extension number that is behind an Interactive
Voice Response (IVR) system. You can configure a dial string that includes "," or "p" or "P"
which indicates a pause in the dial sequence.
This section shows how to configure pause dialing using the Configuration File.
 To configure pause dialing:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameters using the table below as reference.
Table 3-22: Pause Dialing
Parameter Description
voip/services/pause_dialing/digit_duration
Defines the duration time for each pressed
digit. Default: 100 [milliseconds].
voip/services/pause_dialing/digit_gap
Defines the duration time between two digits.
Default: 300 [milliseconds].
voip/services/pause_dialing/pause_duration
Defines the time duration for each pause
symbol. Default: 2 [seconds].