EasyManua.ls Logo

AudioCodes 400HD Series - Disabling Local 3-Way Conferencing Capability; Blocking All Phone Users from Signing out; Enabling Hotdesking

AudioCodes 400HD Series
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
400HD IP Phones Series - Teams Compatible
Administrator's Manual 164 Document #: LTRT-09960
4.17 Disabling Local 3-Way Conferencing Capability
This section shows how to remove the capability of local 3-way conferencing from users.
To disable local 3-way conferencing:
Use the table below as reference.
Table 4-13: Removing Local 3-Way Conferencing Capability from Users - Parameter
Parameter Description
lync/local3wayConf/enabled [0] = the Conf softkey is not displayed in the screen when a call
is in progress, as shown in the figure below
[1] = the Conf softkey is displayed in the screen when a call is
in progress (default)
4.18 Blocking All Phone Users from Signing Out
This section shows how to block all phone users from signing out (overrides the Common
Area parameter 'voip/common_area/enhanced_mode').
To block all phone users from signing out:
Use the table below as reference.
Table 4-14: Blocking All Users from Signing out - Parameter
Parameter Description
lync/userSetting/prevent_user_sign_out
[0] = Sign out softkey is displayed in screens (default)
[1] = Sign out softkey is not displayed in screens
4.19 Enabling HotDesking
The HotDesk feature applies to enterprises that operate according to a 'touch-down desk'
concept. Employees in these enterprises typically travel frequently to remote branches, or
work in shifts. They can sign in to a phone that is already signed in by another user (CAP or
regular) without signing out the original user to whom the phone was assigned for primary
use.
When the HotDesk user signs out or if the phone stays in idle state longer than the HotDesk
timeout defined on the server, the phone automatically returns to its original user and state;
its configuration and data are preserved as they were before the phone was leased for
HostDesk use. HotDesk users cannot perform all operations that the original user (CAP or
regular) could perform, for example, change Language.
Network administrators must enable the feature on the server by setting parameter
EnableHotDesking to 'True'.

Table of Contents

Other manuals for AudioCodes 400HD Series

Related product manuals