AudioCodes 400HD Series - Configuring a Dedicated Voicemail Server; Table 3-41: Dedicated Voicemail Server - Parameters

400HD IP Phones Series - Teams Compatible
Administrator's Manual 90 Document #: LTRT-09960
3.4.20 Configuring a Dedicated Voicemail Server
This section shows how to configure a dedicated voicemail server for the enterprise, as an
alternative option to Microsoft Exchange Server.
 To configure a dedicated voicemail server:
• Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameters using the table below as
reference.
Table 3-41: Dedicated Voicemail Server - Parameters
Parameter Description
voip/services/msg_waiting_ind/voice_mail_nu
mber
Enter the number of the service to dial in order to
retrieve voicemail.
voip/services/msg_waiting_ind/enabled
Configure either:
 [0] Disabled if a voicemail service isn't required.
 [1] Enabled (default) in order to use Microsoft
Exchange Server for voicemail.
 AUDC_VM in order to use a dedicated voicemail
server other than Microsoft Exchange Server for
voicemail.
voip/services/msg_waiting_ind/subscribe 
[0] Disabled (default) configure this option if you
chose in the previous parameter to use Microsoft
Exchange Server for voicemail.
 [1] Enabled configure this option if you chose in
the previous parameter to use a dedicated
voicemail server, other than Microsoft Exchange
Server, for voicemail.
voip/services/msg_waiting_ind/subscribe_add
ress
Enter the IP address of the AudioCodes gateway or
PBX on which the voicemail application is located.
voip/services/msg_waiting_ind/subscribe_port
Enter the port number of the AudioCodes gateway or
PBX on which the voicemail application is located.
Default: 5060.
voip/services/msg_waiting_ind/expiraition_tim
eout
Defines how often the voicemail application is updated
(refreshed) for new mail. Default: Every 3600 seconds
(i.e., every hour).