AudioCodes 400HD Series - Port Mirroring Network Monitoring

400HD IP Phones Series - Teams Compatible
Administrator's Manual 128 Document #: LTRT-09960
4.9.2 Enabling Automatic Firmware Updates from the Server using
Configuration File
You can use the Configuration File to enable automatic firmware updates from the Skype for
Business Server.
 To enable automatic firmware updates from the Skype for Business server:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 4-2: Automatic Firmware Update from Skype for Business Server - Configuration
File
Parameter Name Description
lync/SfBDeviceUpdate=0
Enables / disables automatic firmware update
from the Skype for Business server.
 [0] Disable (default)

[1]
Enable
4.9.3 Manually Downloading Firmware to the Phone from the Server
When the 'SfB Update' provisioning method is used to provision the phone, you can manually
check and download the firmware file on the Skype for Business server's automatic
upgrading facility.
 To manually check and download the firmware file located on the server to the
phone:
1. In the Web interface, open the Automatic Provisioning page (Management tab >
Automatic Update menu > Automatic Provisioning).
Figure 4-3: Web Interface – Automatic Provisioning
2. Click the Check Now button; the firmware file on the Skype for Business server's
automatic upgrading facility is checked and downloaded to the phone if different.