AudioCodes 400HD Series - Using the Microsoft Teams Application; Signing In to Teams

400HD IP Phones Series - Teams Compatible
Administrator's Manual 46 Document #: LTRT-09960
 To change the LAN Connection Type:
1. Open the Configuration File page in the Web interface (Management tab > Manual
Update > Configuration File).
2. Configure the parameters using the table below as reference.
Table 3-1: Network Settings – Static IP
Parameter Description
Note: To add a value to these parameters, enter network/ followed by the parameter name, equal
sign and then the value (e.g.
network/lan_type
=DHCP).
network/lan_type Defines the IP addressing method:
 [STATIC] Static IP - IP address defined manually
 [DHCP] Automatic IP DHCP (default) - IP address
is acquired automatically from a DHCP server
network/lan/fixed_ip/ip_address The LAN IP address
network/lan/fixed_ip/netmask The subnet mask address
network/lan/fixed_ip/gateway The IP address of the default gateway.
network/lan/fixed_ip/domain_name The domain name.
Domain Name Server (DNS)
network/lan/fixed_ip/primary_dns The primary DNS server address.
network/lan/fixed_ip/secondary_dns
The secondary DNS server address. The phone
connects to this server if the primary DNS server is
unavailable.
The following parameters can be configured:
Table 3-2: Network Settings - Automatic IP (DHCP)
Parameter Description
network/lan_type Defines the IP addressing method:
 [STATIC] Static IP - Phone’s IP address is
defined manually
 [DHCP] Automatic IP DHCP (default) -
Phone’s IP address is acquired automatically
from a DHCP server
network/lan/dhcp/domain_name/enabled Enables setting the domain name manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/domain_name must also
be set.
network/lan/dhcp/ip_address/enabled Enables setting the IP address manually.
 [0] Disable (default)
 [1] Enable
Note: If enabled,
network/lan/fixed_ip/ip_address must be set.
network/lan/dhcp/netmask/enabled Enables setting the network mask manually.