AudioCodes 400HD Series - Registering the Phone on Azure Cloud

Administrator's Manual 4. Configuring Microsoft Skype for Business Features
Version 3.4.4 173 400HD IP Phones Series - Teams Compatible
Table 4-18: Disabling the C450HD IP Phone Screen Saver
Parameter Name Description
personal_settings/ScreenSaverEnabled
Enables / disables the C450HD phone
screen saver.
 [0] Disable
 [1] Enable (default)
personal_settings/ScreenSaverAwakeTimeout
The timeout of the screen saver is triggered
after 300 seconds by default but it can be
configured to 0-600 seconds using this
parameter.
4.29 Registering the Phone on Azure Cloud
The phone supports a client ID for OAuth 2.0 modern authentication in compliance with IETF
RFC 6749 and in compliance with Microsoft’s request to register the phone application on
the Azure cloud service portal and to apply permissions.
The network administrator can enable the new client ID to be used after it’s approved. See
also https://online.audiocodes.com/oauth-2-0-appid.
 To enable the client ID:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 4-19: Enabling the Client ID using the Configuration File
Parameter Name Description
lync/sign_in/azure/Enable_new_client_id
 [0] The phone will use the previous client_id
as part of the Oauth2.0 process.
 [1] The phone will use a new client_id as part
of the Oauth2.0 process (default).