AudioCodes 400HD Series - Configuring LAN Port; PC Port; Table 3-3: Port Settings

400HD IP Phones Series - Teams Compatible
Administrator's Manual 48 Document #: LTRT-09960
3.1.2 Configuring LAN Port / PC Port
Port settings can be configured using the Configuration File.
Note: This section does not apply to the RX50 conference phone.
 To define phone port settings:
1. Open the Configuration File page (Management tab > Manual Update >
Configuration File)
2. Configure using the table below as reference.
Table 3-3: Port Settings
Parameter Description
network/lan/port_mode Sets the LAN port mode.
Valid values are:
AUTOMATIC] = Auto negotiation.
FULL_10] = 10Mbps + full duplex
FULL_100] = 100Mbps + half duplex
HALF_10] = 10Mbps + full duplex
HALF_100] = 100Mbps + half duplex
network/pc/port_mode Sets the computer port mode.
Valid values are:
AUTOMATIC] = Auto negotiation
FULL_10] = 10Mbps + full duplex
FULL_100] = 100Mbps + half duplex
HALF_10] = 10Mbps + full duplex
HALF_100] = 100Mbps + half duplex
DISABLE] = Disables the PC port mode