AudioCodes 400HD Series - Configuring Boss Privacy Mode

400HD IP Phones Series - Teams Compatible
Administrator's Manual 160 Document #: LTRT-09960
4.13.3 Configuring Boss Privacy Mode
The Boss Privacy mode feature conceals a remote caller's ID from Admin’s phone in order
to protect their Boss's privacy.
 To configure Boss Privacy mode:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 4-11: Boss Privacy Mode Parameter
Parameter Name Description
lync/bossPrivacyEnable
[0] = Admin sees a remote caller's ID when they call (Default).
[1] = A call from a remote caller indicates 'Private Call' on the
Admin's phone instead of caller ID.
The Boss's phone indicates the remote side's caller ID for all calls.
Note:
• If Admin has more than one Boss, the same privacy rule applies to all Bosses.
• The parameter is configured per phone rather than per user.
• The Boss's phone indicates the remote side's caller ID for all calls.