AudioCodes 400HD Series - Configuring a Function Key; Configuring a Function Key for Speed Dialing; Table 3-7: Speed Dial Parameter

400HD IP Phones Series - Teams Compatible
Administrator's Manual 52 Document #: LTRT-09960
Parameter Name Description

Hot_Desking
personal_settings/functional_key/n/speed_dial_nu
mber
Allows the user to quickly call someone whose
number is often used or is hard to remember.
Default: 4403.
personal_settings/functional_key/n/line
Corresponding to the line ID. n = the value you
configured as the line index.
3.3.1 Configuring a Function Key
3.3.1.1 Configuring a Function Key for Speed Dialing
Note: The phone’s speed dials can be defined in a simple text-based editor, placed on
a server (e.g., HTTP or FTP/TFTP), and then uploaded to the phone using the
Configuration File.
The Configuration File can include a link to a user-defined Speed Dial file, using the
provisioning/speed_dial_uri parameter. This allows you to upload speed dial settings to
the phone.
The Speed Dial file must include a list of speed dial configurations. The file must be a simple
text file that can be created using an Excel document and saved as a CSV file.
The syntax of the speed dial file is as follows:
<memory key>,<speed dial phone number>,<type>
where:
 memory key denotes the speed dial memory key on the phone.
 speed dial phone number denotes the phone number that is automatically dialed,
when the user presses the speed dial key.
 type denotes the Speed Dial feature and must be set to “0”.
Below is an example of a Speed Dial file:
1,4418,0
2,4403,0
3,039764432,0
4,4391,0
12,1234,0
 To configure a Function Key for speed dialing:
 Open the Configuration File page (Management tab > Manual Update >
Configuration File) and configure the parameter using the table below as reference.
Table 3-7: Speed Dial Parameter
Parameter Name Description
provisioning/speed_dial_uri
The URI for retrieving the speed dial list which must be included in
a separate file to be downloaded to the phone during provisioning.
For example: provisioning/speed_dial_uri=speed_dial_list.txt
Note:
 The speed dial file is downloaded after boot up and periodically
 If the speed dial file is new, the phone reboots.