AudioCodes 400HD Series - 2 Automatic Mass Provisioning of IP Phones Using DHCP

Administrator's Manual 2. Automatic Mass Provisioning of IP Phones using DHCP
Version 3.4.4 19 400HD IP Phones Series - Teams Compatible
2 Automatic Mass Provisioning of IP
Phones using DHCP
This section shows how to automatically provision a mass deployment of AudioCodes IP
phones in a Microsoft Skype for Business environment.
Note: Instead of using DHCP as the automatic provisioning method,
you can
alternatively use Static DNS Record or SIP SUBSCRIBE and NOTIFY messages.
As DHCP clients, AudioCodes IP phones can be automatically provisioned with the following
files:
 Configuration file (.cfg)
 Firmware file (.img)
These files can be placed on any of these three provisioning server types:
 HTTP/S server
 TFTP server
 FTP server
Figure 2-1 summarizes the steps required for setting up mass provisioning of IP phones in a
Microsoft environment.
These steps are described in detail in the following sections.
Note: Automatic mass provisioning of IP phones using the DHCP provisioning method
can alternatively be performed from the phones’ management server. For detailed
information, see the Device Manager Administrator's Manual.