AudioCodes 400HD Series - Allowing Users to Make;Receive Incoming;Outgoing Calls; Allowing Users to Use the Phones Handset

400HD IP Phones Series - Teams Compatible
Administrator's Manual 130 Document #: LTRT-09960
4.10.1.1 Allowing Users to use the Phone's Handset
Network administrators can configure the inband provisioning parameter
'DisableHandsetOnLockedMachine' on the server to allow users to use the phone's handset
even if the phone is locked. Use the table below as reference.
Table 4-4: Inband Provisioning Parameter 'DisableHandsetOnLockedMachine'
Parameter Name Description
DisableHandsetOnLockedMachine Determines handset functionality when the phone is locked.
[0] Allows incoming and outgoing calls when the phone is
locked
[1] Allows only incoming calls when the phone is locked
[2] Disallows incoming and outgoing calls when the phone is
locked
If the parameter is not provisioned, the phone functions as if
the parameter is set to [1] - only incoming calls are allowed
when the phone is locked.
4.10.1.2 Allowing Users to Make/Receive Incoming/Outgoing Calls
Network administrators can configure a local phone parameter 'AllowCallsInLockState' to
determine if users can make/receive incoming/outgoing calls even if the phone is locked.
Use the table below as reference.
Table 4-5: Local Phone Parameter 'AllowCallsInLockState'
Parameter Name Description
AllowCallsInLockState
Determines if users can make/receive incoming/outgoing
calls if the phone locks.
[GET_FROM_INBAND] The phone's capabilities when
locked are set by inband provisioning parameter (default)
[ALLOW_BOTH] Allows users to make/receive
incoming/outgoing calls when the phone is locked
[ALLOW_INCOMING_ONLY] Allows users to make/receive
incoming/outgoing calls when the phone is locked
[DENY_BOTH] Disallows users from making/receiving
incoming/outgoing calls when the phone is locked
If set to ALLOW_BOTH or ALLOW_INCOMING_ONLY or
DENY_BOTH, this parameter overrides the
'DisableHandsetOnLockedMachine' inband provisioning
parameter.