400HD IP Phones Series - Teams Compatible
Administrator's Manual 210 Document #: LTRT-09960
3. Make sure the source Ethernet MAC address is the same as that labeled on the base
of the phone. For example:
Figure B-3: Source Ethernet MAC Address in Wireshark Identical to Phone Base's
C.3 Recovering the Phone
This section shows how to recover the phone.
To recover the phone:
1. Configure the PC NIC to which the phone is connected as follows:
• IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
Figure B-4 below shows the configured settings.
2. Make sure the phone is directly connected (or via a network hub) to the PC LAN NIC.
3. Disable all other PC NICs (also wireless NICs).
To Next Page
Loading...
