AudioCodes 400HD Series - Step 6: Secure the Connection of the Two Units; Step 7: Mount Phone on Base Stand, Expansion Module on Base Stand

400HD IP Phones Series - Teams Compatible
Administrator's Manual 204 Document #: LTRT-09960
A.1.6 Step 6: Secure the Connection of the Two Units
[Refer again to the figure above] Secure the connection of the two units by screwing in these
five screws.
A.1.7 Step 7: Mount Phone on Base Stand, Expansion Module on
Base Stand
With the assembly inverted, mount the phone on its dedicated base stand and the Expansion
Module on its dedicated base stand, like this:
Slots in the stands are slid onto rails on the units. The figure above shows the phone
mounted on the short edge of its ‘L’ shaped base stand, and the Expansion Module
mounted on the short edge of its ‘L’ shaped base stand. The long edge of the ‘L’ can
alternatively be used per user preference, depending on sources of glare in the office.