AudioCodes 400HD Series - Enabling Port Mirroring

Administrator's Manual 7. Diagnostics
Version 3.4.4 193 400HD IP Phones Series - Teams Compatible
7.6 Enabling Port Mirroring
Port Mirroring when enabled changes the NIC from SWITCH to HUB (L2 to L3) so that
network traffic on the LAN port is reflected in the PC port for debugging purposes.
 To enable Port Mirroring:
 Use the table below as reference.
Table 7-5: Port Mirroring Parameters
Parameter Description
network/pc_port_mirroring/enabled Enables port mirroring.
 [0] Disable (default) - The LAN/PC Network
interfaces operate in SWITCH mode.
 [1] Enable - The LAN/PC Network interfaces
operate in HUB mode.