AudioCodes 400HD Series - Manually Pairing the Btoe Pc;Laptop Application with the Phone; Manually Generating a Pair Code; Support for Citrix Xendesktop VDI

400HD IP Phones Series - Teams Compatible
Administrator's Manual 148 Document #: LTRT-09960
4.12.8 Manually Pairing the BToE PC/Laptop Application with the Phone
This section shows how to manually pair the phone with the BToE PC/laptop application,
using a pair code.
Before manually pairing, enable the manual pairing functionality by configuring the
Configuration File parameter 'lync/BToE/pairing_mode' to BOTH.
Then follow this procedure:
1. Generate a pair code (see Section 4.12.8.1)
2. Connect the phone and BToE PC/laptop application using the pair code (see Section
4.12.8.3)
Note:
• If the IP address changes, you'll need to generate a pair code again.
• If you know the last pair code, you don't need to generate a new one.
If you don't know it, see the next section.
4.12.8.1 Support for Citrix XenDesktop VDI
BToE supports Citrix XenDesktop virtual desktop infrastructure (VDI); BToE can connect a
phone in a XenDesktop environment. To connect the phone to XenDesktop, set the
configuration file parameter ‘/lync/BToE/pairing_mode’ to VDI. BToE version 2.1.8 must be
installed. BToE runs in the following XenDesktop modes:
 Persistent Sessions. In this mode, a dedicated VM is used per user; it’s always
active.
 Non-Persistent Session. In this mode, the user is connected to an available VM in
the pool. After the user logs off, the machine can be used by another user. When the
user is connected, their settings and data are restored.
After the user is connected to the XenDesktop environment and signs-in to Skype for
Business, all BToE functions are available. BToE runs on Xen Desktop, paired
manually to the phone. The user’s pc running the XenDesktop client can be connected
directly to the phone. The BToE application runs on XenDesktop and is paired via
manual IP pairing. During a video call, audio is routed from the XenDesktop client to
the phone.
Note:
• HDI optimization must be is disabled for BToE to function correctly with Citrix XenDesktop.
• XenDesktop (for remote users) runs on Windows 10.
• Thin client is not supported.
4.12.8.2 Manually Generating a Pair Code
This section shows how to manually generate a pair code.
 To manually generate a pair code:
 On the phone, press the MENU hard key and in the Menu screen that is displayed,
choose BToE; the BToE pair code is displayed: