AudioCodes 400HD Series - Disabling the Bxfer (Blind Transfer) Softkey; Table 3-28: Blind Transfer Softkey Parameter

Administrator's Manual 3. Manual Configuration of a Single IP Phone
Version 3.4.4 75 400HD IP Phones Series - Teams Compatible
3.4.10 Disabling the BXfer (Blind Transfer) Softkey
This section shows how to disable the BXfer softkey displayed by default in the phone's
screen during a call. If the network administrator disables the BXfer softkey, Hold will be
displayed instead. The BXfer softkey gives users an alternative way to perform Blind
Transfer (see the User's Manual for more information on call transfer).
 To disable the BXfer softkey:
• Use the table below as reference, and then click Submit.
Table 3-28: Blind Transfer Softkey Parameter
Parameter Description
voip/signalling/sip/sk_blind_transfer/enable
Enables display / removes display of the
BXfer softkey in the phone screen when in
a call.
 [0] Removes display of the BXfer
softkey when in a call; the Hold softkey
is displayed instead.
 [1] Enables display of the BXfer
softkey when in a call (default).