AudioCodes 400HD Series - Pairing Across Different Subnets; Troubleshooting; Figure 4-30: Web Interface - Configuration File

Administrator's Manual 4. Configuring Microsoft Skype for Business Features
Version 3.4.4 155 400HD IP Phones Series - Teams Compatible
4.12.12 Pairing Across Different Subnets
Pairing across different subnets is enabled by default. The 'lync/BToE/CheckNetwork=0' field
in the configuration file enables it.
 To make sure pairing across different subnets is enabled:
1. In the Web interface, access the Configuration File page (Management tab > Manual
Update > Configuration File).
Figure 4-30: Web Interface - Configuration File
2. Locate the 'CheckNetwork' field. Make sure it is set to its default of 0.
0 = pairing across different subnets enabled
1 = pairing across different subnets disabled
4.12.13 Troubleshooting
If a BToE issue occurs such as a pairing issue, or if a BToE error notification is received,
access the logged issue on the pc on which BToE is installed, in the location equivalent to
the following location:
C:\Program Files (x86)\AudioCodes\Better2Gether USB Over Ethernet\log
Use the details of the logged issue to inform you how to troubleshoot.
Also refer to AudioCodes' video tutorial about BToE, at http://youtu.be/fZZ0nPWJ7uM.