Administrator's Manual 4. Configuring Microsoft Skype for Business Features
Version 3.4.4 153 400HD IP Phones Series - Teams Compatible
4.12.10 Making Sure IP Phone/ Skype for Business Client are Paired
This section shows how to make sure you successfully paired your IP phone with the Skype
for Business client.
4.12.10.1 Making Sure the Skype for Business Client is Paired
You can make sure the Skype for Business client is paired with the IP phone.
To make sure the Skype for Business client is paired with the IP phone:
1. In the Skype for Business application, in the lowermost left corner of the screen, click
the Select Primary Device icon ; the following popup menu opens:
2. Make sure Handset AudioCodes 400HD Phone is selected.
Note:
• When answering an incoming video call with a paired phone, the call is
established. The default device is the PC speaker/microphone rather than the
phone. Subsequent audio calls will be unaffected; the paired phone will still be the
default device.
• In pairing mode, the user (Skype for Business PC client /phone) can perform up to
two concurrent calls (incoming/outgoing). See the Release Notes.
4.12.10.2 Making Sure the Phone is Paired with the PC/Laptop
You can determine from the phone's idle screen if the phone is paired with the Skype for
Business client.
After connecting the phone's PC port to the PC/laptop 'behind' the phone using a
standard straight-through RJ-45 cable, the notification Better Together Activated
pops up and then disappears. Two interlocked rings displayed in the idle screen
indicates that the phone is paired.
Note: The icon shown above is that displayed in the 450HD and C450HD phone's idle
screen. The concept is identical for all phones, though size and color differ from one to
another.
If the idle screen does not display two interlocked rings, this indicates that the phone is
not paired with the PC/laptop.
To Next Page
Loading...
