AudioCodes 400HD Series - Page 113

Administrator's Manual 3. Manual Configuration of a Single IP Phone
Version 3.4.4 113 400HD IP Phones Series - Teams Compatible
Parameter Description
system/daylight_saving/start_date/hour The hour in the day.
The valid range is 0 to 23.
system/daylight_saving/start_date/minute The minute in an hour.
The valid range is 0 to 59.
system/daylight_saving/end_date
This subsection defines the ending day for the
daylight saving offset.
 [month] - defines the specific month in a
year
 [day] - defines the specific day in a month
 [hour] - defines the specific hour in a day
 [minute] - defines the specific minute in an
hour
For example: To configure the phone to end the
daylight savings on July 16
th
at 22:15, set the
following:
system/ntp/daylight_saving/end_date/month=7
system/ntp/daylight_saving/end_date/day=16
system/ntp/daylight_saving/end_date/hour=22
system/ntp/daylight_saving/end_date/minute=15
system/daylight_saving/end_date/month The month in a year.
The valid range is 1 to 12.
system/daylight_saving/end_date/day The day in a month.
The valid range is 1 to 31.
system/daylight_saving/end_date/hour The hour in the day
The valid range is 0 to 23.
system/daylight_saving/end_date/minute The minute in an hour.
The valid range is 0 to 59.
system/daylight_saving/offset The offset value for the daylight saving.
The valid range is 0 to 180. The default offset is
60.
system/daylight_saving/start_date/week Relevant to ‘Day of week’ mode:
The week of month (values 1-5) for start of
daylight saving time.
system/daylight_saving/start_date/day_of_week
Relevant to ‘Day of week’ mode:
The day of week for daylight saving time start
Valid values :
[SUNDAY]
[MONDAY]
[TUESDAY]
[WEDNESDAY]
[THURSDAY]
[FRIDAY]
[SATURDAY]