AudioCodes 400HD Series - Collecting Logs from Teams Admin Center

400HD IP Phones Series - Teams Compatible
Administrator's Manual 124 Document #: LTRT-09960
2. Note that the EnableClientMusicOnHold parameter is set to FALSE. Run the
following command to set it to TRUE:
Set-CSClientPolicy Global -EnableClientMusicOnHold:$TRUE
But note that in case the phone and PC client are connected with same user, the Skype for
Business PC client setting is “stronger” than the phone setting (in case of collision).
3. To prevent users from selecting or changing the music played on hold, run the
following command defining the audio file:
Set-CSClientPolicy -EnableClientMusicOnHold:$TRUE -
MusicOnHoldAudioFile <Audio file Path>
 To choose the music to be played on the IP phone:
1. Open the ini configuration file in an editor like Notepad.
2. Configure the 'lync/moh/url' parameter with the required file transport (TFTP). The
format supported by the IP phone is:
♦ WAV linear 16k 16 bit -OR-
♦ WAV a/u law
3. Save and close the file and load it to the phone.