EasyManuals Logo
Home>AudioCodes>Gateway>MediaPack MP-11 Series

AudioCodes MediaPack MP-11 Series User Manual

AudioCodes MediaPack MP-11 Series
1195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #506 background imageLoading...
Page #506 background image
User's Manual 506 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Rule 1 Rule 2 Rule 3 Rule 4 Rule 5
Source Prefix
201 1001 123451001# [30-40]x 2001
Stripped Digits
From Left
- 4 - - 5
Stripped Digits
From Right
- - - 1 -
Prefix to Add
971 5 - 2 3
Suffix to Add
- 23 8 - -
Number of
Digits to Leave
- - 4 - -
Presentation
Allowed Restricted - - -
Below is a description of each rule:
Rule 1: When the destination number has the prefix 03 (e.g., 035000), source number
prefix 201 (e.g., 20155), and from source IP Group ID 2, the source number is
changed to, for example, 97120155.
Rule 2: When the source number has prefix 1001 (e.g., 1001876), it is changed to
587623.
Rule 3: When the source number has prefix 123451001 (e.g., 1234510012001), it is
changed to 20018.
Rule 4: When the source number has prefix from 30 to 40 and a digit (e.g., 3122), it is
changed to 2312.
Rule 5: When the destination number has the prefix 6, 7, or 8 (e.g., 85262146),
source number prefix 2001, it is changed to 3146.
Table 24-2: Phone Number Manipulation Tables Parameter Descriptions
Parameter Description
General
Index
[_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
manipulation-name
[_ManipulationName]
Defines an arbitrary name to easily identify the row.
The valid value is a string of up to 20 characters. By default, no value is
defined.
Note: Each row must be configured with a unique name.
Match
Source IP Address
src-ip-address
[_SourceAddress]
Defines the source IP address of the caller. This is obtained from the
Contact header in the INVITE message.
The default is the asterisk (*) wildcard (i.e., any address).
Note:
The parameter is applicable only to the Destination Phone Number
Manipulation for IP-to-Tel Calls table and Source Phone Number
Manipulation for IP-to-Tel Calls table.
The source IP address can include the 'x' wildcard to represent
single digits. For example, 10.8.8.xx represents all IP addresses
between 10.8.8.10 to 10.8.8.99.
The source IP address can include the asterisk (*) wildcard to

Table of Contents

Other manuals for AudioCodes MediaPack MP-11 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-11 Series and is the answer not in the manual?

AudioCodes MediaPack MP-11 Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediaPack MP-11 Series
CategoryGateway
LanguageEnglish

Related product manuals