User's Manual 16 Document #: LTRT-65422
MP-11x & MP-124
Regulatory Information
The Regulatory Information can be viewed at http://www.audiocodes.com/downloads.
Related Documentation
Manual Name
SIP CPE Release Notes
MP-11x & MP-124 SIP Installation Manual
MP-11x SIP Fast Track Guide
MP-124 AC SIP Fast Track Guide
MP-124 DC SIP Fast Track Guide
CPE Configuration Guide for IP Voice Mail
DConvert User's Guide
CPTWizard User's Guide
SNMP User's Guide
Note: MP-
11x devices are indoor units and therefore, must be installed only
. In addition, FXS and Ethernet port interface cabling must be
routed only indoors and must not exit the building.
Note: MP-
124 devices are indoor units and therefore, must be installed only
INDOORS. The MP-124 FXS telephony cables can be routed outdoors. In
such a case, power surge protection means are required (refer to the
for detailed instructions). The Ethernet port interface
cabling must be routed only indoors and must not exit the building.
Note:
The scope of this document does not fully cover security aspects for
deploying the device in your environment. Security measures should be done
in accordance with your organization’s security policies. For basic security
guidelines, you should refer to AudioCodes
Guidelines document.
Note: Before configuring the device, ensure that it is installed correctly as instructed
in the Hardware Installation Manual.
Note: This device supports the SAS and/or Gateway / IP-to-IP applications; not the
SBC application.
To Next Page
Loading...
Need help?
General
