AudioCodes MediaPack MP-118 User Manual

Version 6.6 577 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
43.14 Automatic Update Parameters
The automatic update of software and configuration files parameters are described in the
table below.
Table 43-64: Automatic Update of Software and Configuration Files Parameters
Parameter Description
General Automatic Update Parameters
[AutoUpdateCmpFile]
Enables the Automatic Update mechanism for the cmp file.
 [0] = (Default) The Automatic Update mechanism doesn't apply
to the cmp file.
 [1] = The Automatic Update mechanism includes the cmp file.
Note: For this parameter to take effect, a device reset is required.
[AutoUpdateFrequency]
Defines the number of minutes that the device waits between
automatic updates. The default is
0 (i.e., the update at fixed intervals
mechanism is disabled).
Note: For this parameter to take effect, a device reset is required.
[AutoUpdatePredefinedTime]
Defines schedules (time of day) for automatic updates. The format
of this parameter is: 'HH:MM', where HH denotes the hour and MM
the minutes, for example, 20:18.
Notes:
 For this parameter to take effect, a device reset is required.
 The actual update time is randomized by five minutes to reduce
the load on the Web servers.
EMS: AUPD Verify Certificates
[AUPDVerifyCertificates]
Determines whether the Automatic Update mechanism verifies
server certificates when using HTTPS.
 [0] = Disable (default)
 [1] = Enable
[AUPDCheckIfIniChanged]
Determines whether the Automatic Update mechanism performs
CRC checking to determine if the ini file has changed prior to
processing.
 [0] = (Default) Do not check CRC. The ini file is loaded whenever
the server provides it.
 [1] = Check CRC for the entire file. Any change, including line
order, causes the ini file to be re-processed.
 [2] = Check CRC for individual lines. Use this option when the
HTTP server scrambles the order of lines in the provided ini file.
[ResetNow]
Invokes an immediate device reset. This option can be used to
activate offline (i.e., not on-the-fly) parameters that are loaded using
the parameter IniFileUrl.
 [0] = (Default) The immediate restart mechanism is disabled.
 [1] = The device immediately resets after an ini file with this
parameter set to 1 is loaded.
Software/Configuration File URL Path for Automatic Update Parameters
[CmpFileURL]
Defines the name of the cmp file and the path to the server (IP
address or FQDN) from where the device can load the cmp file and
update itself. The cmp file can be loaded using HTTP/HTTPS, FTP,
FTPS, or NFS.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet