AudioCodes MediaPack MP-118 User Manual

Version 6.6 363 MP-11x & MP-124
User's Manual 35. Carrier-Grade Alarms
35 Carrier-Grade Alarms
This section describes how to view the following types of alarms:

Active alarms - see 'Viewing Active Alarms' on page 363

Alarm history - see 'Viewing Alarm History' on page 363
35.1 Viewing Active Alarms
The Active Alarms page displays a list of currently active alarms. You can also access this
page from the Home page (see 'Viewing the Home Page' on page 59).
 To view the list of active alarms:

Open the Active Alarms page (Status & Diagnostics tab > System Status menu >
Carrier-Grade Alarms > Active Alarms).
For each alarm, the following information is provided:

Severity: severity level of the alarm:
• Critical (red)
• Major (orange)
• Minor (yellow)

Source: unit from which the alarm was raised

Description: brief explanation of the alarm

Date: date and time that the alarm was generated
You can view the next 20 alarms (if exist), by clicking the Go to page button.
35.2 Viewing Alarm History
The Alarms History page displays a list of alarms that have been raised and traps that have
been cleared.
 To view the list of history alarms:

Open the Alarms History page (Status & Diagnostics tab > System Status menu >
Carrier-Grade Alarms > Alarms History).
For each alarm, the following information is provided:

Severity: severity level of the alarm:
• Critical (red)
• Major (range)
• Minor (yellow)
• Cleared (green)

Source: unit from which the alarm was raised

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet