AudioCodes MediaPack MP-118 User Manual

User's Manual 370 Document #: LTRT-65422
MP-11x & MP-124
36.7 Viewing Call Routing Status
The Call Routing Status page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.
 To view call routing status:

Open the Call Routing Status page (Status & Diagnostics tab > VoIP Status menu >
Call Routing Status).
Figure 36-5: Call Routing Status Page
Table 36-3: Call Routing Status Parameters
Parameter Description
Call-Routing Method
 Proxy/GK = Proxy server is used to route calls.
 Routing Table = The Tel to IP Routing table is used to route calls.
IP Address
 Not Used = Proxy server isn't defined.
 IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.
State
 N/A = Proxy server isn't defined.
 OK = Communication with the Proxy server is in order.
 Fail = No response from any of the defined Proxies.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet