AudioCodes MediaPack MP-118 User Manual

Version 6.6 579 MP-11x & MP-124
User's Manual 44. DSP Templates
44 DSP Templates
This section lists the DSP templates supported by the device. Each DSP template provides
support for specific voice coders (as well as channel capacity and various features).
Notes:
• To select the DSP Template that you want to use on the device, see
Configuring DSP Templates on page 161.
• Installation and use of voice coders is subject to obtaining the
appropriate license and royalty payments.
• The number of channels refers to the maximum channel capacity of the
device.
• For additional DSP templates, contact your AudioCodes representative.
Table 44-1: DSP Firmware Templates for MediaPack Series
DSP Template
0 1
Maximum Number of Channels
Default SRTP Enabled Default SRTP Enabled
MP-112 FXS/FXO
2 2 2 2
MP-114 FXS/FXO
4 3 3 3
MP-118 FXS/FXO
8 6 6 6
MP-124
24 18 18 18
Voice Coder
G.711 A/Mu-law PCM
Yes Yes
G.726 ADPCM
Yes Yes
G.727 ADPCM
Yes Yes
G.723.1
Yes Yes
G.729 A, B
Yes Yes
EG.711
Yes -
G.722
- Yes

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet