AudioCodes MediaPack MP-118 User Manual

Version 6.6 325 MP-11x & MP-124
User's Manual 30. Resetting an Analog Channel
30 Resetting an Analog Channel
You can inactivate (reset) an FXO or FXS analog channel. This is sometimes useful, for
example, when the device (FXO) is connected to a PBX and the communication between
the two can't be disconnected (e.g., when using reverse polarity). This is done in the Web
interface's Home page.
 To reset an analog channel:
1. Open the Home page.
2. Click the required FXS or FXO port icon; a shortcut menu appears.
3. From the shortcut menu, choose Reset Channel; the channel is changed to inactive
and the port icon is displayed in gray.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet