AudioCodes MediaPack MP-118 User Manual

Version 6.6 261 MP-11x & MP-124
User's Manual 25. Analog Gateway
25 Analog Gateway
This section describes configuration of analog settings.
25.1 Configuring Keypad Features
The Keypad Features page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:

Call Forward

Caller ID Restriction

Hotline for automatic dialing

Call Transfer

Call Waiting

Rejection of Anonymous Calls
Notes:
• The Keypad Features page is available only for FXS interfaces.
• The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
• The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
• For a description of the keypad parameters, see 'Telephone Keypad
Sequence Parameters' on page 550.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet