AudioCodes MediaPack MP-118 User Manual

Version 6.6 35 MP-11x & MP-124
User's Manual 3. Introduction
3 Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:

Embedded HTTP/S-based Web server - see 'Web-based Management' on page 37

Command Line Interface (CLI) - see 'CLI-Based Management' on page 73

AudioCodes Element Management System - see EMS-Based Management on page
87

Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page
81

Configuration ini file - see 'INI File-Based Management' on page 89
Notes:
• Some configuration settings can only be done using a specific
management tool. For example, some configuration can only be done
using the Configuration ini file method.
• Throughout this manual, where a parameter is mentioned, its
corresponding Web, CLI, and ini parameter is mentioned. The ini file
parameters are enclosed in square brackets [...].
• For a list and description of all the configuration parameters, see
'Configuration Parameters Reference' on page 421.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet