AudioCodes MediaPack MP-118 User Manual

User's Manual 372 Document #: LTRT-65422
MP-11x & MP-124
Column Name Description

Fail = Remote side doesn't respond.
 Init = Connectivity queries not started (e.g., IP address not resolved).

Disable = The connectivity option is disabled, i.e., parameter 'Alt Routing Tel
to IP Mode' (AltRoutingTel2IPMode ini) is set to 'None' or 'QoS'.
Quality Status
Determines the QoS (according to packet loss and delay) of the IP address.
 Unknown = Recent quality information isn't available.
 OK
 Poor
Notes:
 This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
 This parameter is reset if no QoS information is received for 2 minutes.
Quality Info.
Displays QoS information: delay and packet loss, calculated according to
previous calls.
Notes:
 This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
 This parameter is reset if no QoS information is received for 2 minutes.
DNS Status
DNS status can be one of the following:
 DNS Disable
 DNS Resolved
 DNS Unresolved

AudioCodes MediaPack MP-118 Specifications

General

Brand	AudioCodes
Model	MediaPack MP-118
Category	Gateway
Language	English