AudioCodes MediaPack MP-118 User Manual

User's Manual 378 Document #: LTRT-65422
MP-11x & MP-124
Field Name Description
TON
Source phone number type
Note: This field is applicable only to the Gateway application.
NPI
Source phone number plan
Note: This field is applicable only to the Gateway application.
SrcPhoneNum
Source phone number
SrcNumBeforeMap
Source number before manipulation
TON
Destination phone number type
Note: This field is applicable only to the Gateway application.
NPI
Destination phone number plan
Note: This field is applicable only to the Gateway application.
DstPhoneNum
Destination phone number
DstNumBeforeMap
Destination number before manipulation
Durat
Call duration
Coder
Selected coder
Intrv
Packet interval
RtpIp
RTP IP address
Port
Remote RTP port
TrmSd
Initiator of call release (IP, Tel, or Unknown)
TrmReason
SIP call termination reason (see 'Release Reasons in CDR' on page 380)
Fax
Fax transaction during call
InPackets
Number of incoming packets
OutPackets
Number of outgoing packets
PackLoss
Local packet loss
RemotePackLoss
Number of outgoing lost packets
SIPCalld
Unique SIP call ID
SetupTime
Call setup time
ConnectTime
Call connect time
ReleaseTime
Call release time
RTPdelay
RTP delay
RTPjitter
RTP jitter
RTPssrc
Local RTP SSRC
RemoteRTPssrc
Remote RTP SSRC
RedirectReason
Redirect reason
TON
Redirection phone number type
Note: This field is applicable only to the Gateway application.
NPI
Redirection phone number plan
Note: This field is applicable only to the Gateway application.

AudioCodes MediaPack MP-118 Specifications

General

Category	Gateway
Analog Ports	8 FXS ports
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Protocols	SIP, MGCP, H.323
Model	AudioCodes MediaPack MP-118
Fax Support	T.38
Management	Web-based, SNMP, CLI
Security	SRTP, TLS, HTTPS
Power Supply	AC 100-240V, 50-60Hz
Humidity	10% to 90%, non-condensing
Network Interfaces	2 x 10/100Base-T Ethernet