AudioCodes MediaPack MP-118 - Page 469

Version 6.6 469 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
value allows a registering UA to remove all bindings
associated with an address-of-record (AOR) without
knowing their precise values.
Note: The REGISTER-
specific Contact header field value of "*"
applies to all registrations, but it can only be used if the Expires
header field is present with a value of "0".
Web/EMS: Add Empty Authorization
Header
[EmptyAuthorizationHeader]
Enables the inclusion of the SIP Authorization header in initial
registration (REGISTER) requests sent by the device.
 [0] Disable (default)
 [1] Enable
The Authorization header carries the credentials of a user
agent (UA) in a request to a server. The sent REGISTER
message populates the Authorization header with the following
parameters:
 username - set to the value of the private user identity
 realm - set to the domain name of the home network
 uri - set to the SIP URI of the domain name of the home
network
 nonce - set to an empty value
 response - set to an empty value
For example:
Authorization: Digest
username=alice_private@home1.net,
realm=”home1.net”, nonce=””,
response=”e56131d19580cd833064787ecc”
Note: This registration header is according to the IMS 3GPP
TS24.229 and PKT-SP-24.220 specifications.
Web: Add initial Route Header
[InitialRouteHeader]
Enables the inclusion of the SIP Route header in initial
registration or re-registration (REGISTER) requests sent by the
device.
 [0] Disable (default)
 [1] Enable
When the device sends a REGISTER message, the Route
header includes either the Proxy's FQDN, or IP address and
port according to the configured Proxy Set, for example:
Route: <sip:10.10.10.10;lr;transport=udp>
or
Route: <sip: pcscf-
gm.ims.rr.com;lr;transport=udp>
EMS: Ping Pong Keep Alive
[UsePingPongKeepAlive]
Enables the use of the carriage-return and line-feed sequences
(CRLF) Keep-Alive mechanism, according to RFC 5626
“Managing Client-Initiated Connections in the Session Initiation
Protocol (SIP)” for reliable, connection-orientated transport
types such as TCP.
 [0] Disable (default)
 [1] Enable
The SIP user agent/client (i.e., device) uses a simple periodic
message as a keep-alive mechanism to keep their flow to the
proxy or registrar alive (used for example, to keep NAT
bindings open). For connection-oriented transports such as